For an Argentine fleet considering the 2021 XCMG pump truck HB62V, begin with the shifts it will actually cover. Mechabro lists reference 241118P617 with a six-section boom, 61.1 m of vertical reach and a four-axle Mercedes-Benz chassis. If your pours regularly run past daylight, ask the seller to show the lights fitted to this truck and record which work areas they illuminate. Then put the remaining lighting and traffic responsibilities on the site plan. That gives your team a way to assess the truck separately from the temporary lighting and people needed to run an evening pour.
Key Takeaways
- Evaluate the exact HB62V by reference 241118P617 and ask for the applicable working diagram.
- Have the inspector list fitted work lights and record each area they cover.
- Assign site lighting, mixer traffic and shift handover before comparing delivery offers.

2021 XCMG Pump Truck on Mercedes-Benz: Equipment Record
The equipment listing for 241118P617 supplies the figures below. The original Mechabro field photo shows the parked truck from the rear quarter. Use that angle to identify areas you want photographed during the lighting review, including the rear work zone and the side of the pump body.
| Item | Listed configuration | Use for the buying decision |
|---|---|---|
| Model and year | 2021 XCMG HB62V | Match the inspection and documents to this equipment reference. |
| Boom | Six sections; 61.1 m vertical and 55.9 m horizontal | Screen candidate positions and request the working diagram. |
| Pump | 180 m³/h theoretical output; listed concrete pressure 13 MPa | Discuss the job’s required rate with the batching and placing teams. |
| Chassis | Mercedes-Benz Arocs 4143 8×4, four axles | Identify the vehicle for workshop and carrier enquiries. |
| Dimensions and weight | 14,515 × 2,550 × 4,000 mm; 46,000 kg listed total | Give the carrier and site team a starting point for access checks. |
Price Equipment Lighting and Site Lighting Separately
Ask for photos and a dated check of the lights fitted to the HB62V, noting the switch, mounting and area each lamp covers. Ask the technician to list faults or proposed work separately. The Putzmeister M36-4 Standard Line data sheet lists lighting at its control points, hopper and other work areas. Use that as an example of how a manufacturer describes lighting by location. The configuration and condition of this XCMG come from the unit inspection.
Have the Argentine site team sketch the mixer approach, the area where the driver and spotter communicate, the place where the pump operator stands and the route used by the placing crew. A lamp on the truck may illuminate the pump body while leaving the mixer approach dark. WorkSafe Queensland’s alert on delivery to pumps identifies reversing near workers and vehicle movement around the hopper as risks to plan for. Use it as a planning reference alongside the machine instructions and local requirements.
Ask for a Second Shift Handover That Can Be Checked
A useful handover covers the planned pour, the approved setup, who controls mixer movements and whom to call if visibility or communications change. Put the open equipment items and their owners on a one-page note. If the site provides portable lights or a dedicated spotter, name the responsible party. That information helps a buyer distinguish additions to the truck from resources the contractor must arrange.
For example, a truck lamp may be included in the equipment price while a portable light tower is hired near the site. Put each item beside its owner, expected completion date and handover record. If the inspection finds that a lamp or wiring needs work, ask the seller to state whether the work and a repeat check will be completed before dispatch.
- Send the unit reference and a sample night-pour layout to Mechabro’s inspection and preparation team.
- Ask for a written lamp inventory, observed condition and separately priced work where required.
- Compare an alternative from the XCMG pump truck catalogue with the same requests.
- Use the concrete pump truck price guide to separate the equipment amount, requested work and transport. Name the handover point and the records included.
Frequently Asked Questions
What boom reach does the listed 2021 XCMG HB62V have?
Mechabro reference 241118P617 lists 61.1 m vertical reach, 55.9 m horizontal reach and six boom sections. Ask for the applicable working diagram when evaluating the planned setup.
Does 241118P617 come with work lights?
Ask for an inventory and a demonstration of the lamps fitted to this truck. Have the report identify what works, what needs attention and which areas still need site lighting.
Is the listed 180 m³/h the rate to use in a night pour plan?
Use 180 m³/h as the listed theoretical pump output. Base the job plan on the required placing rate, mixer supply, site layout and crew capacity.
What price should a buyer use for this HB62V?
The equipment page displays US$104,000 as an indicative reference and invites a current written quote. Ask for a written equipment price with inspection, requested lamp or wiring work and delivery priced separately.
What should I send for a quote to Argentina?
Send reference 241118P617, the destination, your target delivery window and a sample site layout. Specify the lighting checks, equipment preparation and handover documents you want included.
Request an HB62V Quote for Argentina
Contact Mechabro about this XCMG pump truck with reference 241118P617, your destination and a sketch of the work areas. Ask for current availability, configuration, condition, applicable documents, a written price and the agreed lighting inspection, preparation and delivery scope.
Sources
- Putzmeister, M36-4 Standard Line technical data sheet, accessed November 17, 2026; manufacturer example of lighting at specific work points.
- WorkSafe Queensland, Delivering Concrete for Pumping, January 19, 2024, accessed November 17, 2026; mixer traffic and delivery planning background.


