When comparing a used concrete pump truck for a Brazilian jobsite, ask where the boom reach measurement starts. A brochure may give both horizontal reach from the boom rotation axis and a shorter distance measured from the truck front. Those figures answer different questions. Use the range diagram for the exact pump and chassis, then compare it with a site sketch marked with the proposed truck position and pour elevation. For a buyer choosing between two trucks, this check can expose a mismatch before the team spends time arranging an inspection or pricing delivery.
Key Takeaways
- Record the starting point and endpoint for every reach figure in your comparison.
- Use the range diagram to read reach at the target elevation.
- Check whether the front-of-truck figure applies to the advertised chassis.
- Have your site team assess the allowable setup and working sector.

Where Used Concrete Pump Truck Reach Begins
In a technical drawing, the boom rotation axis is a useful origin for locating the boom tip. Your site survey may use a different origin, such as the edge of an entrance or the front of the cab. If the estimate is measured from the entrance while the equipment figure begins at the rotation axis, put both measurements on the same drawing before comparing them.
Putzmeister’s 39Z-Meter brochure illustrates the difference. It lists 33.60 m horizontal reach and 30.70 m reach from the truck front, with a chassis qualification attached to the front measurement. Its range diagram also labels net reach separately. The 2.90 m difference belongs to that published example. Use the drawing for the actual truck to determine its reference points. The original Mechabro field photo above shows a different machine from the XCMG pump truck gallery; its folded profile provides a visual reference for the relationship between the boom and chassis.
| Field on the drawing | What to record | How it helps a buyer |
|---|---|---|
| Horizontal reach | The origin, endpoint and measurement units. | Compare published figures that use the same convention. |
| Reach from the truck front | The chassis note and front reference point. | Relate the drawing to a forward approach. |
| Working envelope | The target height or depth and corresponding horizontal distance. | Check the required pour point against the diagram. |
| Permitted working sector | The applicable support configuration and direction of work. | Identify which arrangement your site team needs to review. |
Put the Truck and the Pour on the Same Sketch
Imagine a Brazilian contractor pricing a deck pour where the only candidate parking area is outside the access gate. The drawing puts the placement point 32 m beyond the proposed position of the truck front. In the brochure example, comparing 32 m with 33.60 m would use the wrong origin. The listed front-of-truck figure is 30.70 m, so that example does not pass even the first distance screen. This is a hypothetical comparison to show why the origin matters.
A side approach needs its own geometry. Mark the truck orientation and where the boom axis would be on the plan. Add a side view with the pour elevation relative to the proposed truck setup. The farthest point on a plan may be less demanding than a nearer point at a higher elevation or behind an obstruction. Ask the technical team to review both views together.
The permitted sector can also depend on how a specific unit is supported. SCHWING’s EASy Flex documentation gives a manufacturer example of a system with model-specific support arrangements and working range limits. Use the diagrams and instructions applicable to your candidate unit. Site approval and operating decisions belong to qualified personnel familiar with the machine and the local requirements.
Make Reach Comparable Before Asking for a Quote
If your purchasing sheet is in Portuguese, record alcance horizontal and alcance a partir da frente do caminhão as separate fields. Keep the manufacturer’s original labels alongside your translations. A general listing may only show the boom class or headline reach; asking for the chart early helps the seller identify the information your technical reviewer needs.
- Pick a candidate from the used pump truck range or send the link you already have.
- Ask for the applicable reach diagram and the chassis drawing for that unit.
- Mark the proposed truck position, target pour points and any obvious obstructions on a dimensioned sketch.
- Discuss the remaining measurements and inspection questions through Mechabro’s equipment services team.
Then compare the current equipment quotation for each candidate on the same basis. Keep the machine configuration, requested inspection and any preparation work distinct from the delivery scope.
Frequently Asked Questions
What is the difference between horizontal reach and reach from the truck front?
They can use different starting points. A range diagram may show horizontal reach from the boom rotation axis and quote a separate figure measured from the front of a particular truck. Ask for the drawing and its chassis notes.
Can I subtract a fixed distance to convert horizontal reach to net reach?
Use the offsets and reference points shown for the exact configuration. The position of the boom pedestal and the front of the truck can differ between mountings, and a front offset does not describe a side approach.
Does a larger boom class guarantee more reach on my site?
Compare the working envelope at your target elevation and approach direction. Ask your site team to review the permitted support arrangement and available space for the exact unit.
What should I send for a used pump truck quotation in Brazil?
Send the unit reference, a plan and side view of the pour, your city and state, the delivery point and the desired timing. Request current price, condition information, inspection scope and the exact configuration in writing.
Can a folded boom photograph tell me the usable reach?
Use the photograph to orient yourself around the truck. For dimensions, use the applicable boom range diagram, chassis drawing and site measurements reviewed by your qualified team.
Request a Unit-Specific Comparison
Contact Mechabro about a used concrete pump truck with the unit reference, plan, pour elevation and delivery point in Brazil. Ask for current availability, price, configuration, condition details, applicable documents and delivery scope for that exact machine.
Sources
- Putzmeister America, 39Z-Meter truck-mounted specifications and range diagram, accessed November 6, 2026.
- SCHWING America, EASy Flex One-Sided Outrigger System, accessed November 6, 2026.


